The VES-ZB-MOT-019 is a Zigbee Motor Controller and offers the following features:
- 3-Wire (with Neutral) wiring
- 2 Output Channels
- 2 Switch Input Channels
- Supports Momentary Switches
- 2A Capacitive / Inductive Load per channel
- Works with positionign to allow Precise Control
- Automatic Calibration
- Small Installation Size 45.5 x 45 x 20.3 mm
- Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges
A manual for this device can be downloaded here.
Vesternet Zigbee Herdsman Converters
These are officially available via the Zigbee2MQTT codebase, meaning that with a recent Zigbee2MQTT installation Vesternet Zigbee devices should work out-of-the-box in Home Assistant.
Sometimes changes to the herdsman converters can take a while to appear in the official Zigbee2MQTT codebase, so you can also download them direct from our Github repository.
Adding herdsman converters manually is possible via Zigbee2MQTT, simply upload the file to the same location as your Zigbee2MQTT configuration file and then add the file name to the "External Converters" section in the Settings area of the Zigbee2MQTT UI.
More information on this is available in the Zigbee2MQTT documentation.
Please report any issues with the Vesternet Zigbee Herdsman Converters by submitting a technical request ticket.
This Vesternet Device has the following features when used with our supporting Herdsman Converter in Zigbee2MQTT (tested with Zigbee2MQTT version 1.30.1).
- Supports Open, Close and Stop.
- Reports Open and Closed Events for each channel when operated from the local switch.
- Has configuration options for power on behaviour.
