The VES-ZB-MOT-019 is a Zigbee Motor Controller and offers the following features:
- 3-Wire (with Neutral) wiring
- 2 Output Channels
- 2 Switch Input Channels
- Supports Momentary Switches
- 2A Capacitive / Inductive Load per channel
- Works with positionign to allow Precise Control
- Automatic Calibration
- Small Installation Size 45.5 x 45 x 20.3 mm
- Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges
A manual for this device can be downloaded here.
Vesternet Zigbee Device Drivers
These can be downloaded from here.
One file is required for this particular Device:
- Vesternet VES-ZB-MOT-019 Motor Controller.groovy
Please report any issues with the Vesternet Zigbee Device Drivers by submitting a technical request ticket.
This Vesternet Zigbee Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).
- Supports Open and Close from the Web UI.
- Reports Open and Close Events for each channel when operated from the local switches.
- Can be used as a "Trigger" for Open and Close Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
- Can be used as a "Trigger" for Meter Events for the whole device in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
- Can be used as an "Action" for Open and Close Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
