Vesternet Zigbee Temperature & Humidity Sensor - Technical Support - SmartThings

The VES-ZB-TEM-027 is a Zigbee Temperature & Humidity Sensor and offers the following features:

  • Supports Temperature And Humidity Events
  • Includes Wall Mount Bracket / Sticky Pads / Screws
  • Small Installation Size 44 x 44 x 17mm
  • CR2405 Battery Powered (battery not included)
  • Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges


A manual for this device can be downloaded here.


Vesternet Hardware Devices are supported in SmartThings via our Vesternet Edge Channel.

Vesternet Edge Channel

In order to make the Device Drivers available for your Vesternet Zigbee devices, simply subscribe to the Vesternet Edge Channel.

Here you can enrol your SmartThings hub to the Edge Channel and select which of the available Device Drivers to install.

Note that the Device Drivers are first release versions so while they might not be fully functional featuring all features and capabilities, they should be usable for their primary functions.

It should also be remembered that the SmartThings Edge platform itself is still under development and changes there may unintentionally break third-party Device Drivers.

Please report any issues with the Vesternet Edge Device Drivers by submitting a technical request ticket.

This Vesternet Device has the following features when used with our supporting Edge Device Driver in the SmartThings Smart Home Controller (tested with SmartThings firmware version 000.032.00012).

  • Reports Temperature, Humidity and Battery Events.
  • Has configuration options for temperature, humidity and battery reporting interval.