The VES-ZB-WAL-006 is a Zigbee Wall Controller / Remote Control and offers the following features:
- Two buttons with simple on / off markings
- Pushed, held and released events for each button
- Standard 80mm x 80mm form factor with sticky pad or screw mounting
- Indicator LED
- Long life CR2450 Battery
- Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges
A manual for this device can be downloaded here.
Vesternet Zigbee Herdsman Converters
These are officially available via the Zigbee2MQTT codebase, meaning that with a recent Zigbee2MQTT installation Vesternet Zigbee devices should work out-of-the-box in Home Assistant.
Sometimes changes to the herdsman converters can take a while to appear in the official Zigbee2MQTT codebase, so you can also download them direct from our Github repository.
Adding herdsman converters manually is possible via Zigbee2MQTT, simply upload the file to the same location as your Zigbee2MQTT configuration file and then add the file name to the "External Converters" section in the Settings area of the Zigbee2MQTT UI.
More information on this is available in the Zigbee2MQTT documentation.
Please report any issues with the Vesternet Zigbee Herdsman Converters by submitting a technical request ticket.
This Vesternet Device has the following features when used with our supporting Herdsman Converter in Zigbee2MQTT (tested with Zigbee2MQTT version 1.30.1).
- Supports On, Off, Brightness Move Up, Brightness Move Down and Brightness Stop Events.
- Reports Battery Level Events.
