Vesternet Z-Wave Wall Controller (4 Button) - Technical Support - Home Assistant - Z-Wave JS

The VES-ZW-WAL-008 is a Z-Wave Wall Controller / Remote Control and offers the following features:

  • Four buttons with simple on / off markings
  • Pushed, held and released events for each button
  • Standard 80mm x 80mm form factor with sticky pad or screw mounting
  • Indicator LED
  • Long life CR2450 Battery
  • Z-Wave Plus with S2 Security


A manual for this device can be downloaded here.

Vesternet Z-Wave Device Configuration Files

These are officially available via the are officially available via the Z-Wave JS codebase, meaning that with a recent Z-Wave JS installation Vesternet Z-Wave devices should work out-of-the-box in Home Assistant.

Please report any issues with the Vesternet Z-Wave Device Configuration Files by submitting a technical request ticket.

This Vesternet Device has the following features when used with our supporting Device Configuration File in Z-Wave JS (tested with Z-Wave JS UI / Z-Wave JS version 8.8.6 / 10.10.0).

  • Supports Pushed, Held, and Released Events for all buttons.
  • Reports Battery Level Events.
  • Can be used as a "Trigger" for Pushed, Held, and Released Events in Logic.