Vesternet Zigbee Wall Controller (4 Button) - Technical Support - Home Assistant - Zigbee2MQTT

The VES-ZB-WAL-011 is a Zigbee Wall Controller / Remote Control and offers the following features:

  • Four buttons with simple on / off markings
  • Pushed, held and released events for each button
  • Standard 80mm x 80mm form factor with sticky pad or screw mounting
  • Indicator LED
  • Long life CR2450 Battery
  • Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges

 

A manual for this device can be downloaded here.

Vesternet Zigbee Herdsman Converters

These are officially available via the Zigbee2MQTT codebase, meaning that with a recent Zigbee2MQTT installation Vesternet Zigbee devices should work out-of-the-box in Home Assistant.

Please report any issues with the Vesternet Zigbee Herdsman Converters by submitting a technical request ticket.

This Vesternet Device has the following features when used with our supporting Herdsman Converter in Zigbee2MQTT (tested with Zigbee2MQTT version 1.30.1).

  • Supports On, Off, Brightness Move Up, Brightness Move Down and Brightness Stop Events for each pair of buttons.
  • Reports Battery Level Events.