The VES-ZW-REM-010 is a Z-Wave Wall Remote Control and offers the following features:
- Ten buttons with simple on / off markings
- Two buttons marked S1 & S2
- Pushed, held and released events for each button
- Candy-bar shape design
- Indicator LED
- Long life CR2450 Battery
- Z-Wave Plus with S2 Security
A manual for this device can be downloaded here.
Vesternet Edge Channel
In order to make the Device Drivers available for your Vesternet Z-Wave devices, simply subscribe to the Vesternet Edge Channel.
Here you can enrol your SmartThings hub to the Edge Channel and select which of the available Device Drivers to install.
Note that the Device Drivers are first release versions so while they might not be fully functional featuring all features and capabilities, they should be usable for their primary functions.
It should also be remembered that the SmartThings Edge platform itself is still under development and changes there may unintentionally break third-party Device Drivers.
Please report any issues with the Vesternet Edge Device Drivers by submitting a technical request ticket.
This Vesternet Device has the following features when used with our supporting Edge Device Driver in the SmartThings Smart Home Controller (tested with SmartThings firmware version 000.032.00012).
- Supports Pushed, Held, and Released Events for all buttons (SmartThings doesn't offer an Event for "Released" so our Device Handler utilises the "Double Pushed" Event instead).
- Reports battery level in the Device Details section of the App
- Allows assigning of "Actions" for all button Events from the Device Details section of the App.
- Allows adding of "Automations" for the battery level from the Automations section of the App.
