Question 1

Can this module be used behind a standard UK Socket and control/monitor it? View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 2

What does the physical switch attached to this device do? does it activate the dimming or does it just enable/disable the whole device? Forgive the naiivety of the question, I'm still a noob at this View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 3

Manual says it transmits every 15mins in Normal mode. But does the message contain multiple readings or only a single reading covering the entire 15mins. I am after history with lower granularity, say 1min, but don't want to drain battery with Real-Time mode.

Asked 8 ´years ago | Z-Wave Data Logger for E-Meters

Question 4

Will this work with the new smart gas meters. (EDF have installed a Flonidan branded Smart Gas Meter but it cannot connect to the mobile telephone network so cant get at the data)

Asked 8 ´years ago | Z-Wave Data Logger for E-Meters

Question 5

What's the difference between this model (FIBEFGS-223) and the FIBEFGS-222? One is described as a switch and the other as a relay, but otherwise seem identical. Does it make any difference to what it can do? I want to use them behind existing light switches to control lighting circuits - does it make any difference which I use? Thanks! View answers

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 6

How is this better than the Fibaro Dimmer 2 (which I just bought)? "outperforms all that has come before it" is quite a grand claim - is it just compatible with a broader selection of LED bulbs? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 7

Does this have Low Battery Alert? View answers

Asked 8 ´years ago | Z-Wave Fibaro Flood Sensor

Question 8

Does this work with Samsung SmartThings Hub? View answers

Asked 8 ´years ago | Z-Wave Fibaro Flood Sensor

Question 9

Which bypass do you recommend & stock, for use with lighting loads below 4 watts? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 10

Please can you recommend other night latches which are compatible with the keyless smart lock. This is the only one Yale lists as compatible but I do not like it.

Asked 8 ´years ago | Brands - Yale > Yale Smart Living Y3 Contemporary Nightlatch

Question 11

I am looking for a Z-Wave Plus LED controller that has DMX512 output. Does this device or do you know of any others that fit the bill please? View answer

Asked 8 ´years ago | Brands - Qubino > Z-Wave Qubino RGBW Dimmer Plus

Question 12

Has anybody seen an issue where the Q outputs don't follow the S inputs? I have to toggle the state of the input switch a few times to get it to sync up. The input switch is the microswitch on my Heating Control Valve. View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 13

I am using a pir to switch this on which seems to work but it keeps showing as device not detected! I'm using Vera edge is there a parameter I need to change or is it not compatible thanks View answers

Asked 8 ´years ago | Z-Wave Fibaro Single Switch 2

Question 14

When will Aeotec Wallmote double be available for UK installation & quad back in stock? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 15

Does this have the possibility of manual override in case Z-wave is down? I don´t see a button View answer

Asked 8 ´years ago | Qubino 32A Contactor for Smart Meter

Question 16

It says "For use with Qubino Smart Energy Meter". Is the Smart Meter a requirement to use this contactor or can it be used without it? View answers

Asked 8 ´years ago | Qubino 32A Contactor for Smart Meter

Question 17

Can this be controlled locally via SmartThings if there is no internet connection? It is possible to link a Z-Wave remote to it directly? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 18

Does this device work fully with HomeSeer? View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 19

Would there be a minimum GU10 number of lights that would not need a Fibaro dimmer 2 ? I have a number of circuits with GU10 lights 6W X 9 in a kitchen and out in a hallway 2 way circuits of 2 each by 2 and a circuit of 4. Would I need a dimmer bypass then for all circuits. View answer

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 20

Does anyone know if this unit is stable with HomeSeer? I have a couple of the Fibaro Dual Relay units but their status reporting is flaky at best and I cannot rely on them. - Thanks! View answer

Asked 8 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 21

Hi - when wired this into a double switch and then included this with a Vera Plus controller there were 3 devices created - the master and 2x appliance modules. In Vera only using the master switch has an affect and it only controls one of the switches. How do I include this so that both switches are controlled? View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 22

I have a set of motorised curtains which run off 12V DC. Can I use this device to control them? It has a 4-wire input in addition to the 12C DC power socket: Green:Close/Open, Red:Open/Close, Yellow:Stop, Black:Neutral. View answers

Asked 8 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 23

Is this compatible with Vera Edge please? View answers

Asked 8 ´years ago | Z-Wave Plus Secure SES302 Temperature Sensors Gen5

Question 24

The blurb on this product says you can connect an external probe, but one is not supplied. The picture shows a very neat looking probe. Can anyone recommend a specific (and cost effective) probe that is known to work with this sensor? View answer

Asked 8 ´years ago | Z-Wave Fibaro Flood Sensor

Question 25

Can this unit be controlled by other Z-wave controllers? Is the Smart Meter required for it to function?

Asked 8 ´years ago | Qubino 32A Contactor for Smart Meter

Question 26

Can this unit be controlled from other z-wave controllers? or is the smart meter required? View answer

Asked 8 ´years ago | Brands - Qubino > Z-Wave Qubino Smart Meter ZMNHTD1 Plus

Question 27

Does this work with 3 way switched circuits? Can't find a wiring diagram for even 2way switching in the manual. View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 28

Out of stock within 3 days of email saying in stock. Pointless. Bad. How to lose customers.

Asked 8 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 29

How can this be set up for two-way circuits? i.e. two switches controlling one light. I can't see a wiring diagram to support this in the manual. View answers

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 30

My door is 76mm wide, do you have an extension kit for this lock? View answer

Asked 8 ´years ago | Yale Conexis L1 Smart Door Lock - Polished Chrome

Question 31

is this a straight swap for the existing Yale Smart living Keyfree multipoint lock? View answer

Asked 8 ´years ago | Yale Conexis L1 Smart Door Lock - Polished Chrome

Question 32

Does this have an outdoor IP rating? If so please could you let me know what it is?

Asked 8 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule with Door Opener

Question 33

Does anyone know if there is a zwave module for this lock? View answers

Asked 8 ´years ago | Yale Conexis L1 Smart Door Lock - Polished Chrome

Question 34

What is the average battery life in this button, how often does it need to be replaced or recharged? View answer

Asked 8 ´years ago | Z-Wave Philio Smart Colour Button Gen5

Question 35

For Vera is changing the device type to scene controller a guaranteed way to get the single button press to work every time? View answers

Asked 8 ´years ago | Z-Wave Fibaro Button

Question 36

Does Z-Wave Aeon Labs Clamp Power Meter Gen5 - One Clamp (60A) sense current direction, ie import or export of power? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 37

Is this compatible with Home Assistant?

Asked 8 ´years ago | Z-Wave Fibaro Button

Question 38

does it detect carbon monoxide? View answers

Asked 8 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 39

Will this sensor work with an Aeotec Z-Stick V2 (Version: 1.4-2228-gbce4a88-dirty)?

Asked 8 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 40

Is it compatible with Nanoleaf smart light bulbs? View answer

Asked 8 ´years ago | Z-Wave Philio Smart Colour Button Gen5

Question 41

Will the Z-Wave.me USB stick run on a Synology NAS using Domoticz/OpenZWave? i.e. through a Linux OS? I understand OpenZWave is fine but not sure on the OS aspect... View answers

Asked 8 ´years ago | Z-Wave.Me USB Stick

Question 42

Does this use the European or USA Z-wave frequency? View answer

Asked 8 ´years ago | Z-Wave Plus Secure Wall Switch

Question 43

If I had a chandelier with 5 X 6W LEDs (30W total) would I need a Fibaro Dimmer Bypass 2? View answers

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 44

QNAP, OpenHAB + Aeon Labs Z-Stick USB, possible? I'm guessing this is possible, there is a package for OpenHab that will install on QNAP, so if I stick this USB stick into the back of the QNAP box will I be good to go? View answer

Asked 9 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 45

is it interchangeable with yrf10 ? View answer

Asked 9 ´years ago | Yale Smart Living Keyless Connected RFID Key Card

Question 46

Is it suitable for outdoor? Looking to put it in a side gate so will be exposed to the elements. View answers

Asked 9 ´years ago | Z-Wave Plus Aeotec Recessed Door Sensor

Question 47

I want to use a Fibaro relay to swicth an immersion heater on and off. The load is switched using a double pole relay. Can I simply connect the Fibaro output across the relay energising contacts, or will you need a resistor in series to reduce the current? View answer

Asked 9 ´years ago | Z-Wave Fibaro Double Switch 2

Question 48

Can Vesternet or any user provide a config file for OpenZWave? I'm trying to write one but not luck.

Asked 9 ´years ago | Z-Wave Plus Secure Boiler Receiver - two channels

Question 49

Can this be used in a bathroom? View answers

Asked 9 ´years ago | Aeotec Recessor (for MultiSensors & TriSensors)

Question 50

Multiple questions --> What is the difference between the bi-stable and the contactor switch ? I need to switch a load of ~ 4k W (electrical water heater) which uses a double switch (live+neutral), which one suits better ? Do u have any feedback from Vera users that have managed to add them in their network (smart meter, contactor, bi-stable) ? View answer

Asked 9 ´years ago | Brands - Qubino > Qubino 32A Bistable Switch for Smart Meter

Browse by Topic

Tools