Question 1

Is the Z-Wave Plus Philio Outdoor Siren compatible with 2nd gen ring alarm system? View answer

Asked 3 ´years ago | Z-Wave Plus Philio Outdoor Siren

Question 2

What's the difference between this and the 2.5 apart from bluetooth? View answer

Asked 3 ´years ago | Shelly 2PM PLUS

Question 3

What sort of housing would you recommend for this? Would a standard UK single pattress box be suitable? View answer

Asked 3 ´years ago | Vesternet Z-Wave High Load Switch

Question 4

Is it working in israeli z wave? 916 mhz View answer

Asked 3 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 5

AB - When will support for the Button be available in Vera Home Control ? View answers

Asked 3 ´years ago | Z-Wave Fibaro Button

Question 6

AB - Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Asked 3 ´years ago | Z-Wave Fibaro Button

Question 7

AB - The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Asked 3 ´years ago | Z-Wave Fibaro Universal Door & Window Sensor 2

Question 8

If powered by USB, can the batteries be left in to cover a power failure? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 9

Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Asked 3 ´years ago

Question 10

The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Asked 3 ´years ago

Question 11

When will support for the Button be available in Vera Home Control ? View answers

Asked 3 ´years ago

Question 12

Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Asked 3 ´years ago

Question 13

When will support for the Button be available in Vera Home Control ? View answers

Asked 3 ´years ago

Question 14

The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Asked 3 ´years ago

Question 15

High load switch requires three wires? View answer

Asked 3 ´years ago | Vesternet Z-Wave High Load Switch

Question 16

Staircase Switches View answer

Asked 3 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Two Load

Question 17

Vesternet zigbee switch/dimmer - Compatibility with hue bulbs? View answer

Asked 3 ´years ago | Vesternet Zigbee Switch

Question 18

confusion regarding model View answer

Asked 3 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 19

My gates have a pair of IR photocells. Could I input this to the implant to get a notification when beam is broken? View answer

Asked 3 ´years ago | Z-Wave Fibaro Smart Implant

Question 20

Is this available with a UK plug? The pictures show European power pins. View answer

Asked 3 ´years ago | Aeotec Zigbee Range Extender Zi

Question 21

Which Version are you selling, I see you list 3 Spec for different regions but which one am i ordering? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 22

Do these strips actually have a z-wave controller as the category description states, or are they just dumb LED strips that need a z-wave controller and a power supply? Thanks View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 23

Do these strips actually have a z-wave controller as the category description states, or are they just dumb LED strips that need a z-wave controller and a power supply?Thanks View answer

Asked 3 ´years ago | LED Light Strip Warm White - 2700 Kelvin

Question 24

hi, will the Aeotec Smart Home work when there is no broadband connection? I am concerned that I will not be able to control things at my home when the internet is down. View answers

Asked 3 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 25

hi, will the Aeotec Smart Home work when there is no broadband connection?I am concerned that I will not be able to control things at my home when the internet is down. View answers

Asked 3 ´years ago | Aeotec SmartThings Hub (V3)

Question 26

Is this available in EU frequency? Shows US on the back of the box.Are the relays good for 240V AC? View answer

Asked 3 ´years ago | Z-Wave Plus Zooz Universal Relay

Question 27

Is this available in EU frequency? Shows US on the back of the box. Are the relays good for 240V AC? View answer

Asked 3 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 28

Hi, I wonder if I can connect this strip directly to the wire? I don't see in the advertisement any explanation how can I connect this strip. I would also like to make sure this strip can work directly with Smartthings and will not require additional hub. Regards, Gal View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 29

Hi,I wonder if I can connect this strip directly to the wire?I don't see in the advertisement any explanation how can I connect this strip.I would also like to make sure this strip can work directly with Smartthings and will not require additional hub.Regards,Gal View answer

Asked 3 ´years ago | Zigbee Aduro Led Strip 3 Meters

Question 30

Hello,Will the black version be available to buy in the near future? View answer

Asked 3 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 31

Hello, Will the black version be available to buy in the near future? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 32

Is this the EU version (868 MHz)? View answer

Asked 3 ´years ago | Yale Smart Living Z-Wave Module 2

Question 33

What frequency are this controller (Z-Wave.Me RaZberry 7 Pro (with external Antenna)) using? EU or US.RegTrygve View answer

Asked 3 ´years ago | Z-Wave.Me RaZberry 7 Pro (with external Antenna)

Question 34

What frequency are this controller (Z-Wave.Me RaZberry 7 Pro (with external Antenna)) using? EU or US. Reg Trygve View answer

Asked 3 ´years ago | LED Light Strip Warm White - 2700 Kelvin

Question 35

could you use this with an existing wired door bell to replace the sounder? View answer

Asked 3 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 36

Will this fit in a recessor AEO_DSE010 View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 37

Did it include the Rechargeable Lithium Battery in the package? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 38

Does anyone know if these are 100kbps devices? The original universal binary sensor was 40k View answers

Asked 3 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 39

Hi, anyone using it with Athom Homey ? Does it show correctly both the power and energy ? Non-USB version of the UK plug is not showing the power at all .. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 40

Can this be configured so that when the switch is off then power is still sent to the light bulb?I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 3 ´years ago | Z-Wave TKB Single Paddle Wall Dimmer TZ35S - Gen5

Question 41

Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 42

I have a small, simple propane fireplace with a 2 wire connection (heat only) that needs to be controlled by a battery powered thermostat. Would this work? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 43

Is there a Device Handler so that this works with smartthings? Although Frient is listed as a partner when adding a device, the keypad is not listed ?? Alternatively, maybe another keypad so I can use it with a konnected alarm panel for deactivation by Guest_vs. View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 44

Is there a Device Handler so that this works with smartthings? Although Frient is listed as a partner when adding a device, the keypad is not listed 🙁 Alternatively, maybe another keypad so I can use it with a konnected alarm panel for deactivation by guests. View answer

Asked 3 ´years ago | Zigbee Frient Keypad

Question 45

Would this be suitable to independently control multiple infrared panel heaters? I have a fibaro HC3 and would use Aeotec multi sensors to monitor temperatures. View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 46

Would this be suitable to independently control multiple infrared panel heaters?I have a fibaro HC3 and would use Aeotec multi sensors to monitor temperatures. View answer

Asked 3 ´years ago | Z-Wave Heatit Z-Din 616

Question 47

Do the Vesternet 2,4 & 8 button z wave wall controllers work with Vera Edge? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 48

What Z-wave frequencies does the model you are selling work on ?I'm after one that will work in Aus (919.8 MHz, 921.4 MHz) View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 49

What Z-wave frequencies does the model you are selling work on ? I'm after one that will work in Aus (919.8 MHz, 921.4 MHz) View answer

Asked 3 ´years ago | LED Light Strip Warm White - 2700 Kelvin

Question 50

This is a large price reduction..Does it suggest you are no longer going to stock this item EZLO ATOM V2? View answer

Asked 3 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Browse by Topic

Tools