Question 1

I have several Qubino Mini Dimmer modules in my current set up - HomeSeer with Aeotec Z-Stick controller. Can I substitute one of these for the Qubino module? View answer

Asked 4 ´years ago | Vesternet Z-Wave Dimmer

Question 2

Hi, I was wondering if this would work with Economy 7 electricity, meaning does it have an internal battery to keep it on and connected to the network when economy 7 isn't active? I'm wondering if it is possible to make economy 7 storage heaters smarter. Thanks. View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 3

Hi. Would I be able to use this at the same time as a Razzberry board or do they both require the same part of the gpio header (Pi3)? View answer

Asked 4 ´years ago | Zigbee Popp ZB-Shield

Question 4

Is there a battery included, just so I know if i need to order a seperate one or not, Thanks. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 5

Hi, I'm assuming I'll be able to control the Zigbee Popp Smart Thermostat via my Homey Hub. Can you confirm please? Many thanks David View answer

Asked 4 ´years ago | Zigbee Popp Smart Thermostat

Question 6

Can these alarms link together, so if one senses smoke they all go off? View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 7

Will the switch send instant status updates back to Vera? To answer the review where this wasn't working I ended up finding the solution here https://community.ezlo.com/t/heltun-he-tps04-and-vera-lite-experience/217229

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 8

Hi, can this camera send images/video to my PC using FTP or some other protocol? View answer

Asked 4 ´years ago | Aeotec SmartThings Cam 360

Question 9

What is the length of the new Q-Reader lead between the pulse module and the data logger. I have a long distance (approximately 22m) between the meter (located next to road) and the house and propose to connect the pulse module to the requisite cores of a CAT5e cable (already laid underground) and then connect the Q-Reader within the house where it can connect via z-wave to my hub. Is this proposal possible if the cable is not long enough? View answer

Asked 4 ´years ago | Z-Wave Data Logger for E-Meters

Question 10

Is this also compatible with the Raspberry Pi 400 running Home Assistant? Or is there a suitable alternative I should look at? View answers

Asked 4 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 11

Is this the latest (2019, green) version of this board, or the slightly earlier (2018, blue) version? Obviously the photo shows a blue one, but good to know for sure! View answer

Asked 4 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 12

They were £24.99 before now £34 I'd call that a big difference.

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 13

Why has the prices gone up so much for what is just a rebrand. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 14

Is it resistant to condensation/waterproof? What is the operating humidity range? View answer

Asked 4 ´years ago | Z-Wave Fibaro Multi Sensor

Question 15

Does it include an acceleration sensor (accelerometer or any kind of vibration sensor) for door knocker detection? View answer

Asked 4 ´years ago | Z-Wave Technisat Door/Window Sensor

Question 16

Would this work with an existing KwikSet deadbolt? Thanks. View answer

Asked 4 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 17

Hello, I bought it a month ago. What estimated date will it there be stock? When will I receive it? View answer

Asked 4 ´years ago | Aeotec SmartThings Cam 360

Question 18

Can you confirm I would receive the newer version of the ZMNHOD1 module? With updated flash And S7 firmware. The older ones have H1S5P1 printed on the sticker after the model number ZMNHOD1, these cannot be updated to the S7 firmware. Thanks View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 19

Is it compatible with google assistant? Can I stream it through a Google Nest Hub?

Asked 4 ´years ago | Aeotec SmartThings Cam 360

Question 20

Hi, is this smoke detector compatible with Samsung SmartThings Hub? View answer

Asked 4 ´years ago | Z-Wave Plus Abus Z-Wave Smoke Sensor

Question 21

Available as UK three pin yet? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Smart Switch 7

Question 22

When will this item be in stock? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 23

When will this items be on stock :AEOTEC Smartthings motion sensor,door sensor, button ,etc. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 24

Hello, I have an issue with Hubitat's z-wave range, does this device also function as a z-wave repeater? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 25

How long is the mains cable please? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 26

Is the Aeotec motion sensor the same as the Samsung in terms of range and sleep time after detecting motion? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 27

When will smart buttons will be in stock I have one on order about 8 weeks approx and want to order more items all out of stock In antisipation Harvey View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Button

Question 28

Is this device the same as the Z wave Gen 5 +? The Gen 5 (older version) is not compatible with Raspberry Pi, however, the Gen 5 + is, refer Aeotec info: https://aeotec.com/z-wave-usb-stick/ View answer

Asked 4 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 29

Will this pair with the ring alarm system for use in the uk View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 30

Hi, do I need the switches (as shown in the video) ? Or can I just set up some scenes in my homecentre? View answer

Asked 4 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 31

How close does the door open sensor need to be to the main unit? View answer

Asked 4 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 32

As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks! View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 33

Is there any reason why these Fibaro Roller Shutter 3 models will not work with a 4 wire 230V AC curtain motor (open, close, neutral, earth)? View answer

Asked 5 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 34

Hi In the picture it’s showing two readings - is one the set point and the other Actual room temp ? Which way round are there Is this compatible with Vera Plus ? View answer

Asked 5 ´years ago | Z-Wave Heatit Thermostat Z-Temp 2

Question 35

Hi, Would anyone have any schematic diagrams to show how to install this device to arm a hardwired and non-smart alarm system? Thanks View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 36

Just wondering if you shipp to Cyprus,and also would I need a Samsung Smartthings account on a UK address (region) as I saw many comments that this hubs are theoretically for US/UK market ,will it function normally with an European account via the Samsung app? Feedback much appreciated . Thanks View answer

Asked 5 ´years ago | Aeotec SmartThings Hub (V3)

Question 37

Have NorthQ updated this product to a Q-Reader? View answer

Asked 5 ´years ago | Z-Wave Data Logger for E-Meters

Question 38

Dear Vesternet, Works Heatit z-smoke correct with fibaro HC3? Thanks. Enrico Kersten View answer

Asked 5 ´years ago | Z-Wave Heatit Z-Smoke Detector - 230V

Question 39

Do you know when the Hubitat Elevation Model C-7 Hub will be back in stock? View answer

Asked 5 ´years ago | Hubitat Elevation Model C-7 Hub (UK version)

Question 40

When do you expect these back in stock? It's the only one missing from me placing an order for about 6 units. View answer

Asked 5 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 41

Hi Is it possible to interlink two or more of these Z-Wave smoke sensors ? So when one detects smoke and sounds its siren alarm, to have a second smoke sensor also sound its siren ? I cannot see anything in the user manual and using either Group 1 or 2 association groups doesn't seem to work. Thanks View answer

Asked 5 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 42

If the mains adapter is used with this, can the battery still be used as a backup power source if the mains power is cut? View answer

Asked 5 ´years ago | Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 43

Philio 2 in 1 Temperature/Humidity Sensor. What is accuracy of measurements? What is battery life if polling every 30 minutes? View answer

Asked 5 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 44

Does this work with Samsung Smarthings? View answer

Asked 5 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 45

Does this require neutral or can it replace a lightswitch in a 2 wire setup? View answer

Asked 5 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Two Buttons - White

Question 46

Hi Is this compatible with an iTec Home Zwave gateway https://www.itechome.co.uk/products ? Thanks View answer

Asked 5 ´years ago | Popp 433 Bridge - White

Question 47

Is the logo on the front removable ? View answer

Asked 5 ´years ago | Z-Wave Plus MCO Home Glass Touch Dimmer UK

Question 48

When is this thermostat going to be available? Also, will it work an electric underfloor heating system?

Asked 5 ´years ago | Brands - Heltun > Z-Wave Plus V2 Heltun Heating Thermostat

Question 49

Hello, I'm looking to update my secure 321 Thermostat with something that looks a bit more modern but it needs to be battery driven do you have anything that will work with the secure 2 channel receiver I just purchased from you, thanks View answer

Asked 5 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 2 Pipe - Black

Question 50

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Browse by Topic

Tools