Does this work with Smartthings? View answer
Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor
Does this have a uk plug ? View answer
Asked 2 ´years ago | Shelly Gas LPG
is it good for outdoor use? View answer
Asked 2 ´years ago | Z-Wave Plus Sensative Strips Guard 700
Hi, I wonder if I can connect this strip directly to the wire? I don't see in the advertisement any explanation how can I connect this strip. I would also like to make sure this strip can work directly with Smartthings and will not require additional hub. Regards, Gal View answer
Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6
Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer
Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion: https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429 I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer
Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
Can't add this to Homeseer - just errors on Addnode.Also, previously with version 6 I have a poe splitter to power it.With this version it doesn't seem to work and a USB to micro usb is supplied. Presumably I need to poe split differently??? ( not entirely sure why it doesn't power ) View answer
Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7
The marketing and product box for this item promotes that you can plug it in and power it from a nearby socket. They show this in the manual for the US 110v version , but for the UK/EU 230v version it suggests it has to be hard wired into the main consumer unit ?As I have a socket right next to the consumer unit? Please could someone explain why I can’t connect the power cable to a UK plug and power it, rather than pay for an electrician to hardwire it? View answer
Asked 3 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)
Sensor 6 has several flaws. Reset button link via a piece of dodgy plastic, poor light level reading, poor UV reading.Apart from these, it was very good. Have they been addressed in Sensor 7? E.G. What range is read for the light level?Can I trust the reset mechanism? Can I assume it will work well with RaZberry? View answer
Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7
what is the size of the motion sensor? View answer
Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor
Is it support EU frequency (868.42)? View answer
Asked 3 ´years ago | Z-Wave Plus Aeotec Trisensor
When will this item be in stock? View answer
Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor
As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks! View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6
Does this work with Samsung Smarthings? View answer
Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6
