Smart Home Sensors Q&A

Question 1

Appropriate for fridge and freezer View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec aërQ Temperature & Humidity Sensor

Question 2

I'm having trouble pairing this with an Aeotec USB z-wave stick. Is this compatible? View answer

Asked 2 ´years ago | Z-Wave Vision PIR/Temperature Sensor

Question 3

Does this unit take power factor in to account? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 4

I saw it's supported by Athom Homey. However Homey doesn't have an Zooz app. How should it be connected then? View answer

Asked 2 ´years ago | Z-Wave Plus Zooz Universal Relay

Question 5

I have this linked to a HC3 but always states 'not configured' no matter how many times I try - not compatible? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 6

what temp/temp difference would trigger it? If my elektric bathroom heater blows on it? View answer

Asked 2 ´years ago | Zigbee frident intelligent värmelarm

Question 7

Once the probe is installed into the base, can the actual main device still detect water or just the probe now? View answer

Asked 2 ´years ago | Zigbee Frient Water Leak Detector Probe

Question 8

Is there a way to adjust the sensitivity on the motion sensor or through smart things? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 9

Does it work with 220v and usa frequency 908.42mhz ? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 10

Will it work with fibaro hc2 with us frequency? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 11

Can the sensor submerge in the water, is it water proof ? View answer

Asked 2 ´years ago | Zigbee Frient Water Leak Detector Probe

Question 12

How long does it take for the proble to dry ? Is the proble plastic or cloth/fabric etc ? View answer

Asked 2 ´years ago | Zigbee Frient Water Leak Detector Probe

Question 13

Does this work with smartthings hub v1? View answer

Asked 2 ´years ago | Z-Wave Plus Sensative Strips Guard 700

Question 14

What is the inclusion process? I assume you use the round magnet for that process. View answer

Asked 2 ´years ago | Z-Wave Plus Sensative Strips Guard 700

Question 15

How many comes in the package? View answer

Asked 2 ´years ago | Z-Wave Plus Sensative Strips Guard 700

Question 16

Is the zmnhbd3 z-wave 2 relays suitable for controling ( on/off only) a cailing fan? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 17

Hi, does this work with HC3? Lots of confusing information regarding this particular model... View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 18

will this work without a fibaro hub using e.g. homeassistant and z-stick 700? View answer

Asked 2 ´years ago | Z-Wave Fibaro CO Sensor

Question 19

Does this(zmnhbd3 z-wave 2 relays) work with led lights? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 20

Does this relay work without a neutral wire? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 21

will this handle stove exhaust fan or bathroom exhaust fans? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 22

Can you please send us a screen shot of the User Interface in the app? what options does it give us? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 23

Does this work with dc motors? Can it provide dc voltage to a 6V dc servo motor? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 24

Is this zigbee, Z-wave, or both? View answer

Asked 2 ´years ago | Zigbee Frient Water Leak Detector Probe

Question 25

Do you save your devices, scenes, automation programming to your cloud in case something happens and you need to s View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 26

Is this a cloud-dependent? or local-dependent? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 27

Does this require subscription? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 28

Does this have the new z wave gen 700 series chip in it? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 29

Will it work with Hubitat alone or do you still need zigbee hub? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 30

Does this work with Smartthings? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 31

can it be mounted on ceiling and flip image upside down I don’t see any settings for this View answer

Asked 2 ´years ago | Aeotec SmartThings Cam 360

Question 32

Is there a mains powered version of this? Or an alternative smart heat alarm (not smoke) that is mains powered? View answer

Asked 2 ´years ago | Zigbee frident intelligent värmelarm

Question 33

Compatibility with Samsung Smart things View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec klämkraftmätare - Tre klämmor (60a)

Question 34

Hi, does this work with Samsung Smart things View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec klämkraftmätare - Tre klämmor (60a)

Question 35

Does the door sensor work with HomeKit? View answer

Asked 2 ´years ago | Z-Wave Fibaro Universal Door & Window Sensor 2

Question 36

Does this have a uk plug ? View answer

Asked 2 ´years ago | Shelly Gas LPG

Question 37

is it good for outdoor use? View answer

Asked 2 ´years ago | Z-Wave Plus Sensative Strips Guard 700

Question 38

AB - The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Asked 2 ´years ago | Z-Wave Fibaro Universal Door & Window Sensor 2

Question 39

If powered by USB, can the batteries be left in to cover a power failure? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 40

My gates have a pair of IR photocells. Could I input this to the implant to get a notification when beam is broken? View answer

Asked 2 ´years ago | Z-Wave Fibaro Smart Implant

Question 41

Is this available in EU frequency? Shows US on the back of the box.Are the relays good for 240V AC? View answer

Asked 3 ´years ago | Z-Wave Plus Zooz Universal Relay

Question 42

Hi, I wonder if I can connect this strip directly to the wire? I don't see in the advertisement any explanation how can I connect this strip. I would also like to make sure this strip can work directly with Smartthings and will not require additional hub. Regards, Gal View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 43

could you use this with an existing wired door bell to replace the sounder? View answer

Asked 3 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 44

Did it include the Rechargeable Lithium Battery in the package? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 45

Hi, anyone using it with Athom Homey ? Does it show correctly both the power and energy ? Non-USB version of the UK plug is not showing the power at all .. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 46

Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 47

Do the Vesternet 2,4 & 8 button z wave wall controllers work with Vera Edge? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 48

What Z-wave frequencies does the model you are selling work on ?I'm after one that will work in Aus (919.8 MHz, 921.4 MHz) View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 49

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion: https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429 I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 50

Hellow, is this product will work in israel with existing modules? where the zwave frequancy is 916? View answer

Asked 3 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Smart Home Sensors Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools