Smart Home Sensors Q&A

Question 1

Can't add this to Homeseer - just errors on Addnode.Also, previously with version 6 I have a poe splitter to power it.With this version it doesn't seem to work and a USB to micro usb is supplied. Presumably I need to poe split differently??? ( not entirely sure why it doesn't power ) View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 2

The marketing and product box for this item promotes that you can plug it in and power it from a nearby socket. They show this in the manual for the US 110v version , but for the UK/EU 230v version it suggests it has to be hard wired into the main consumer unit ?As I have a socket right next to the consumer unit? Please could someone explain why I can’t connect the power cable to a UK plug and power it, rather than pay for an electrician to hardwire it? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 3

Sensor 6 has several flaws. Reset button link via a piece of dodgy plastic, poor light level reading, poor UV reading.Apart from these, it was very good. Have they been addressed in Sensor 7? E.G. What range is read for the light level?Can I trust the reset mechanism? Can I assume it will work well with RaZberry? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 4

Zigbee Frient Motion Sensor Hi does the light sensor function work with SmartThings?Thanks View answer

Asked 3 ´years ago | Zigbee Frient Motion Sensor Pro

Question 5

what is the size of the motion sensor? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 6

Is it support EU frequency (868.42)? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 7

Does this integrate into smasung smartthings like the fire detector? View answer

Asked 4 ´years ago | Zigbee frident intelligent värmelarm

Question 8

Is there a battery included, just so I know if i need to order a seperate one or not, Thanks. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 9

Hi, can this camera send images/video to my PC using FTP or some other protocol? View answer

Asked 4 ´years ago | Aeotec SmartThings Cam 360

Question 10

They were £24.99 before now £34 I'd call that a big difference.

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 11

Why has the prices gone up so much for what is just a rebrand. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 12

Is it resistant to condensation/waterproof? What is the operating humidity range? View answer

Asked 4 ´years ago | Z-Wave Fibaro Multi Sensor

Question 13

Does it include an acceleration sensor (accelerometer or any kind of vibration sensor) for door knocker detection? View answer

Asked 4 ´years ago | Z-Wave Technisat Door/Window Sensor

Question 14

Hello, I bought it a month ago. What estimated date will it there be stock? When will I receive it? View answer

Asked 4 ´years ago | Aeotec SmartThings Cam 360

Question 15

Is it compatible with google assistant? Can I stream it through a Google Nest Hub?

Asked 4 ´years ago | Aeotec SmartThings Cam 360

Question 16

When will this item be in stock? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 17

When will this items be on stock :AEOTEC Smartthings motion sensor,door sensor, button ,etc. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 18

Is the Aeotec motion sensor the same as the Samsung in terms of range and sleep time after detecting motion? View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 19

How close does the door open sensor need to be to the main unit? View answer

Asked 4 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 20

As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks! View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 21

Hi, Would anyone have any schematic diagrams to show how to install this device to arm a hardwired and non-smart alarm system? Thanks View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 22

Philio 2 in 1 Temperature/Humidity Sensor. What is accuracy of measurements? What is battery life if polling every 30 minutes? View answer

Asked 4 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 23

Does this work with Samsung Smarthings? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 24

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 25

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 26

Hi I would like to install this into a air conditioning/ heating system would you be able to offer me some assistance if I was to supply you with the make and model no of the Ac/ Heating unit ? View answers

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 27

I'm looking for a standalone DC power supply to go with this unit. Does anyone here have any recommendations? View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 28

Could I use this module to control 300w towel radiator View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 29

has anyone tested it with Fibaro Home Center 2? Does it work ok? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 30

Hi Just a follow-up question about import/export power. Is this able to monitor flow direction from one clamp -> i.e. whether my solar system is exporting or not to the grid? Mitul View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 31

If I put the relay on momentary mode and press the momentary switch once (and release), the light that connect to relay output will stay at ON (toggle) till I press the momentry again, is that correct? If so, does it means that for 2 way implementation I just need 2 momentry switches connect in parallel to the same input at the qubino 2 relay and every press on one of the momentry switch will toggle the light to ON or OFF? I can't find such suggestion in you app notes guides. Thank you! View answer

Asked 5 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 32

Why does the Aeotec Multi 6 report a 23 lux when my Philips Hue sensor reports 14606 lux in virtually the same position. I've tried it with 3 Aeotec Multi 6s now with the same sort of difference, I'm concerned because I want to use to switch on lighting when required? They even report 0 lux when there is enough light to read a book! View answers

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 33

Have these yet been proven to work with Vera Edge or Vera Plus? I have installed one and whilst, after hours working on-line (computer and telephone) with a Micaverde technician (or two), the binary function works, we can get no sensible response from the 2 x DS18B20 connected. View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 34

Will this sensor detect leaking natural gas. Ie if you knock the gas ring on the cooker and don’t light it View answer

Asked 5 ´years ago | Z-Wave Plus Heiman Gas Sensor

Question 35

does this price include VAT View answer

Asked 5 ´years ago | Z-Wave Fibaro CO Sensor

Question 36

Can the 3 phase clamp measure the current direction (negative current)? For example, when power is provided to the grid (by a solar system) when self consumption is low. View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec klämkraftmätare - Tre klämmor (60a)

Question 37

On Fibaro's website for this product it shows it being able to be installed in audio equipment but there are no references to that type of setup in the manual or instructions. Has anyone tried to use the implant in any appliance to make it smart? If so I assume the compatibility will be based on the appliance and the internal wiring if it can be done. View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 38

is it compatible with HS3 View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec klämkraftmätare - Tre klämmor (60a)

Question 39

Is the battery rechargeable or replaceable? View answers

Asked 5 ´years ago | Z-Wave Philio Multisensor - PIR / Light / Temp - Gen5

Question 40

I bought one of these earlier in the year, am hoping to use to add functionality to an automatic gate opener. I've struggled to get it added into Homeseer correctly, only Output 1 has shown up. Have any Homeseer users had any success getting both outputs to add correctly? If so, any tips? View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 41

Can this be mounted outside? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 42

Hello Could I use this connected to the 12v bell output (I.e. the +and- terminals) in my house intruder alarm to tell my Samsung SmartThings box that the siren is ringing? This would be a remote alert as lightening frazzled the built-in comms dialler! It’s not clear to me from the manual that I could put the 12v through to say “it’s ringing” and “stopped ringing” when it’s 0v. I am also not clear on whether I will be able to configure it with ST (I don’t have the Fibaro control system), or not. Thank you in advance. Neil

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 43

I will be building a new house starting in a few months time and I want to implant temperature sensors in the concrete slab. I have 2 questions; firstly in the manual it says this can be burried concrete with the right protection, what would that protection be please?? Secondly, what would you recommend for protecting the string of temp tensors so they can be safely buried in the concrete and what cable would you connect them with ?? Thanks Chris

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 44

Does this support pulse counting at hardware level ? I'm looking for something to interface to water flow meters with a pulsed output. It would obviously need to store number of pulses received over a certain time period.

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 45

This appears to be a re-incarnation of the Fibaro Universal Binary Sensor which will not now recognise DS18B20 inputs although it used to do so. Is this unit any the more reliable?

Asked 6 ´years ago | Z-Wave Fibaro Smart Implant

Question 46

Can this product be used outdoors? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 47

Can the unit be run from a USB / mains power supply? I don't trust the battery life claims from manufacturers. View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 48

Is this Trisensor replacing the Aeotec Multisensor 6, which has 6 different sensors?

Asked 6 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 49

Do these use the same motion sensor as Aeotec's Multisensor with motion, UV, humidity, vibration, temperature and lux? I'm hoping they don't as the motion sensor in the Aeotec 6-way multisensor is very poor, I have about 5-6 of them and even on the highest setting they often don't detect me even if I walk right up to them and jump around.

Asked 6 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 50

The manual shows this can handle 200A ? I need a single phase meter to cover 100A - will this one work? if not which one will? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Smart Home Sensors Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools