SmartThings Compatible Q&A

Question 1

Does this require subscription? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 2

Is the Shelly Pro 1 PM certified for use in US View answer

Asked 2 ´years ago | Shelly Pro 1PM

Question 3

Does this have the new z wave gen 700 series chip in it? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 4

Z-Wave Popp 10Years Smoke Detector without separated Siren Function View answer

Asked 2 ´years ago | Z-Wave Popp 10Years Smoke Detector without separated Siren Function

Question 5

Is this compatible with HC3? View answer

Asked 2 ´years ago | Z-Wave Donexon Varmo TZ Eco Thermostat

Question 6

Hello, when will the product be available? thank you View answer

Asked 2 ´years ago | Z-Wave Plus V2 Heltun High Load Switch

Question 7

is it good for outdoor use? View answer

Asked 2 ´years ago | Z-Wave Plus Sensative Strips Guard 700

Question 8

Can I us to automate plug sockets, not light switches? View answer

Asked 2 ´years ago | Z-Wave Plus AEOTEC Dual Nano przełącznik z pomiaru mocy

Question 9

Does the Aqara single switch module with neutral work with an Aqara E1 hub View answer

Asked 2 ´years ago | Aqara Single Switch Module T1 (With Neutral)

Question 10

Hi, can this operate as a simple on/off switch without the dimmable feature? Thanks in advance. View answer

Asked 2 ´years ago | Z-Wave TKB Single Paddle Wall Dimmer TZ35S - Gen5

Question 11

Is this available in EU frequency? Shows US on the back of the box.Are the relays good for 240V AC? View answer

Asked 3 ´years ago | Z-Wave Plus Zooz Universal Relay

Question 12

Hi, I wonder if I can connect this strip directly to the wire? I don't see in the advertisement any explanation how can I connect this strip. I would also like to make sure this strip can work directly with Smartthings and will not require additional hub. Regards, Gal View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 13

Hello, Will the black version be available to buy in the near future? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 14

Hello,Will the black version be available to buy in the near future? View answer

Asked 3 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 15

Is this the EU version (868 MHz)? View answer

Asked 3 ´years ago | Yale Smart Living Z-Wave Module 2

Question 16

Did it include the Rechargeable Lithium Battery in the package? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 17

Hi, anyone using it with Athom Homey ? Does it show correctly both the power and energy ? Non-USB version of the UK plug is not showing the power at all .. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 18

Can this be configured so that when the switch is off then power is still sent to the light bulb?I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 3 ´years ago | Z-Wave TKB Single Paddle Wall Dimmer TZ35S - Gen5

Question 19

Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 20

Is there a Device Handler so that this works with smartthings? Although Frient is listed as a partner when adding a device, the keypad is not listed ?? Alternatively, maybe another keypad so I can use it with a konnected alarm panel for deactivation by Guest_vs. View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 21

Do the Vesternet 2,4 & 8 button z wave wall controllers work with Vera Edge? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 22

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion: https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429 I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 23

Hellow, is this product will work in israel with existing modules? where the zwave frequancy is 916? View answer

Asked 3 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 24

Should I expect the internal battery to be reporting at 60% when fresh out of the box?Does it charge overtime? View answer

Asked 3 ´years ago | Z-Wave Heatit Z-Smoke Detector - 230V

Question 25

Hi, Is this device compatible with EU zwave standarsd, or it is only for US zwave protocol? View answer

Asked 3 ´years ago | Yale Keyless Connected Smart Lock - Connected Ready - No Module

Question 26

Does this unit work as a dimmer for a light circuit connected directly? View answer

Asked 3 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - One Button - White

Question 27

Is there a button on the plug-switch to enable me to over-ride the light etc on/off please? View answer

Asked 3 ´years ago | Z-Wave Plus Secure Smart Plug Switch

Question 28

Is the battery replaceable? View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 29

Can you please confirm which version of ZigBee this interface uses? Is it Hue ort SmartThings compatible? The photo doesn't show a ZigBee logo and suggests that it is 2.4GHz RF only control? View answer

Asked 3 ´years ago | Zigbee Controller For RGB And CCT LED Strip

Question 30

How is this different from the earlier version? View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 31

what is the z-wave frequency, i assume it is 868mhz? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Range Extender 6 - UK Socket

Question 32

I see you only have the EU version in stock. What is the difference to the UK version, is it just the plug? ie could I simply put a UK plug on an EU version or use an adapter? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 33

Can these alarms link together, so if one senses smoke they all go off? View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 34

Will the switch send instant status updates back to Vera? To answer the review where this wasn't working I ended up finding the solution here https://community.ezlo.com/t/heltun-he-tps04-and-vera-lite-experience/217229

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 35

Does it include an acceleration sensor (accelerometer or any kind of vibration sensor) for door knocker detection? View answer

Asked 4 ´years ago | Z-Wave Technisat Door/Window Sensor

Question 36

Hi, is this smoke detector compatible with Samsung SmartThings Hub? View answer

Asked 4 ´years ago | Z-Wave Plus Abus Z-Wave Smoke Sensor

Question 37

When will this items be on stock :AEOTEC Smartthings motion sensor,door sensor, button ,etc. View answer

Asked 4 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 38

Hello, I have an issue with Hubitat's z-wave range, does this device also function as a z-wave repeater? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 39

Will this pair with the ring alarm system for use in the uk View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 40

As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks! View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 41

Dear Vesternet, Works Heatit z-smoke correct with fibaro HC3? Thanks. Enrico Kersten View answer

Asked 4 ´years ago | Z-Wave Heatit Z-Smoke Detector - 230V

Question 42

When do you expect these back in stock? It's the only one missing from me placing an order for about 6 units. View answer

Asked 4 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 43

Hi Is it possible to interlink two or more of these Z-Wave smoke sensors ? So when one detects smoke and sounds its siren alarm, to have a second smoke sensor also sound its siren ? I cannot see anything in the user manual and using either Group 1 or 2 association groups doesn't seem to work. Thanks View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 44

Philio 2 in 1 Temperature/Humidity Sensor. What is accuracy of measurements? What is battery life if polling every 30 minutes? View answer

Asked 4 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 45

Does this work with Samsung Smarthings? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 46

Does this require neutral or can it replace a lightswitch in a 2 wire setup? View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Two Buttons - White

Question 47

When is this thermostat going to be available? Also, will it work an electric underfloor heating system?

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Heating Thermostat

Question 48

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 49

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 50

Will this be able to control 2-way lighting circuits? View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

SmartThings Compatible Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools