The VES-ZW-SWI-014 is a Z-Wave 2 Channel Switch and offers the following features:
- 3-Wire (with Neutral) wiring
- 2 Output Channels
- 2 Switch Input Channels
- Supports Momentary Switches
- Supports Scene Commands For Switch Inputs
- 5.1A Resistive Load (1.7A Capacitive / Inductive Load) per channel
- Power, Energy, Voltage & Current Metering (whole device only)
- Small Installation Size 45.5 x 45 x 20.3 mm
- Power Failure Load State Remembering
- Z-Wave Plus v2 700 Series with S2 Security
A manual for this device can be downloaded here.
Vesternet Z-Wave Device Configuration Files
These are officially available via the are officially available via the Z-Wave JS codebase, meaning that with a recent Z-Wave JS installation Vesternet Z-Wave devices should work out-of-the-box in Home Assistant.
Sometimes changes to the device configuration files can take a while to appear in the official Z-Wave JS codebase, so you can also download them direct from our Github repository.
Adding device configuration files manually is possible via Z-Wave JS UI if you have that available, simply navigate to your config location and create a file there, pasting in the code where appropriate.
More information on this is available in the Z-Wave JS UI documentation.
Please report any issues with the Vesternet Z-Wave Device Configuration Files by submitting a technical request ticket.
This Vesternet Device has the following features when used with our supporting Device Configuration File in Z-Wave JS (tested with Z-Wave JS UI / Z-Wave JS version 8.8.6 / 10.10.0).
- Supports On and Off Control of each channel.
- Reports On and Off Events for each channel when operated from the local switch.
- Reports Power, Energy, Current and Voltage Meters for the whole device.
- Has configuration options for all available parameters.
