Vesternet Z-Wave Dimmer - Technical Support - Home Assistant - Z-Wave JS

The VES-ZW-DIM-001 is a Z-Wave 2-Wire Capable Dimmer and offers the following features:

  • 2-Wire (without Neutral) or 3-Wire (with Neutral) wiring and optional Bypass for flexible installation possibilities
  • Configurable for Momentary or Toggle Switches
  • 1.8A Resistive Load (0.8A Capacitive / Inductive Load)
  • Small Installation Size 45.5 x 45 x 20.3 mm
  • Smart Light Source Detection (Trailing / Leading Edge Dimming)
  • Power, Energy, Voltage & Current Metering
  • Soft Start
  • Temperature Emergency Shutoff Protection
  • Power Failure Load State Remembering
  • Z-Wave Plus with S2 Security


A manual for this device can be downloaded here.

Vesternet Z-Wave Device Configuration Files

These are officially available via the are officially available via the Z-Wave JS codebase, meaning that with a recent Z-Wave JS installation Vesternet Z-Wave devices should work out-of-the-box in Home Assistant.

Please report any issues with the Vesternet Z-Wave Device Configuration Files by submitting a technical request ticket.

This Vesternet Device has the following features when used with our supporting Device Configuration File in Z-Wave JS (tested with Z-Wave JS UI / Z-Wave JS version 8.8.6 / 10.10.0).

  • Supports On, Off and Dimming Control.
  • Reports On, Off and Dimming Events when operated from the local switch.
  • Reports Power, Energy, Current and Voltage Meters.
  • Has configuration options for all available parameters.