Automate your Winter heating
With POPP's Thermostat Radiator Valve (TRV) your home will be even more comfortable. Via the Z-Wave automation system you connect it to, you can easily set and automate your desired temperature for each room in which you install the radiator valve.
Other intelligent functions include the detection of open windows which can automatically put the radiator valve into energy-saving mode. There's also a valve training function, which ensures that valves can still be controlled even after a long period of non-use.
With its inbuilt thermostat, the Thermostat Radiator Valve measures and reports accurate temperature back to your Z-Wave gateway. This enables you to evaluate the temperature directly on the radiator and increase the accuracy of your temperature control or use it to manage other electronics connected to your system.
This device is a Z-Wave controlled electronic radiator thermostat. It is SDK 4.5, has Explorer Frame Support and increased network stability.
This radiator thermostat is mounted on wall heating valves and controls them by a motor. The device accepts a setpoint that is either set manually using buttons on the device or wirelessly using Z-Wave. Afterwards, the device will regulate the warm water supply to the wall radiator and compare the detected temperature to ensure that the temperature in the room is kept at the desired level. A small LCD panel on the device displays the setpoint temperature on request.
The device has an internal scheduler, that allows to define up to 9 setpoint for up to 7 week days. Once programmed, these setpoints will be activated without any further manual or wireless interaction. Beside setting a desired temperature the device will support special heating schemes, such as energy saving and frost protection and intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.
Compared with Danfoss "Living Connect" the Popp thermostat will report the room temperature as detected and calculated by the device's temperature sensor to the Z-Wave gateway.
The living connect can be mounted to valves with standard M30x1.5 connector or RA2000.