5 Star Service
Z-Wave Aeotec WallMote Dual brings natural, intrinsic control to the connected home.
Wireless Z-Wave Control on Tap of a Finger
The Aeotec WallMote Dual is a 2-in-1 wall switch and remote control for Z-Wave home automation. When connected to your Z-Wave Controller, get creative with personalized control combinations of your lights, appliances, and Z-Wave devices.
Design focused and battery-operated, the Aeotec WallMote lets you directly control 8 different Z-Wave scenes each with more than 15 devices in them. With touch and touch slide capabilities, WallMote offers unparalleled functionalities for your modern smart home. The WallMote Dual from Aeotec is a portable, wall-mounted, smart Z-Wave remote controller. As it attaches to its wall-mount using magnets, you can also easily remove it to use WallMote anywhere in your home as a remote control and easily re-attach it to the wall later.
Its surface is fitted with an RGB LED to indicate button actions, that are also accompanied by audible feedback and vibration. The WallMote Dual is also a security Z-Wave device and supports Over The Air (OTA) feature for the product firmware upgrade.
Control on Tap of a Finger
Whether you control one or many Z-Wave devices - you can do it all with a single tap.
Each of WallMote's button can be programmed to control one or a few Z-Wave devices. A single tap on its smooth WallMote surface can change a single light or a whole room.
Each button is touch sensitive, meaning you can access new commands and control scenes simply by holding your finger a little longer.
WallMote Dual and WallMote Quad offer a fine-tuned antenna capable of communicating over an open range of over 150 metres.
Both WallMote Dual and WallMote Quad are capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.
With its minimalist design that measures just 7.7cm wide and a slender 1.9cm deep, both WallMote Dual and WallMote Quad are perfectly balanced.
Without the need to ever change a battery, WallMote Dual and WallMote Quad are both powered by a rechargeable lithium battery that can easily be recharged via the provided micro USB cable.
When you press WallMote's touch glass you will feel the change - even you may not even be present to see things change. WallMote's haptic engine confirms your every action via a click sensation.
As a part of Aeotec's Gen5 range of Z-Wave devices, Wallmote was built upon the latest version of Z-Wave- Z-Wave Plus. Cutting-edge performance and security is crafted into this most advanced battery-powered wall switch.
Wireless wall switch for wireless home control
Because of its directly communication with your Z-Wave gateway, WallMote Dual can be used to control anything that your gateway can. Even things that are not Z-Wave like Smart lighting from Philips Hue or Connected music from Sonos. This means that if it is connected to your gateway, you may simply add it to a scene that WallMote can control.
The Aeotec WallMote Dual is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information